Rockers and Rotators
Essendant Suncast Commercial Resin Platform Truck, 1,600 lb Capacity, 24.25 x 52.25 x 41, Black
Transport heavy items in bulk with the help of this heavy-duty resin platform truck This platform truck has a powder coated steel frame and a durable structural foam deck that s resistant to rusting chipping denting and bending for heavy-duty long-lasting use This model features a removable handle along with 8 polyurethane casters that are non-marring and roll smoothly on different surfaces to keep your floors safe With a 1 600 lb weight capacity you can use this platform truck to transport heavy loads with reliability and efficiency Color(s)- Black Color Family- Black Overall Dimensions- 24 25x52 25x41 Material(s)- Steel Structural Foam
HARVARD BIOSCIENCE INC CHAMBER HEATER PLATFORM
Total order minimum requirement of $500 per supplier requirements. A $25.00 order fee will be applied if entire order is less than the $500 minimum requirement.
Biosurface Technologies Corp Dual Channel Coupon Evaluation Flow Cell (polycarbonate flow channel; platform stage mount), for Growing and Imaging of Biofilms on Disc Coupons.
"The models FC 270 and 271 flow cell design is based on the FC 71 but accommodates two growthchannels. This allows biofilms to be grown side by side for duplicate or “control – treatment” experiments. Biofilms growing in each channel can be easily compared microscopically by simply moving the microscope stage backwards or forwards. The body of the flow cell consists of a polycarbonate or anodized aluminum flow channel. Glass viewing ports allow reflected, fluorescent, and confocal microscopy of biofilm growth in the flow channels.The viewing window consists of a no. 2, 24x60 mm cover slip. The glass viewing window is held in place by an aluminum cover plate. The cover plates also compress the silicone rubber gasket to provide a leak-proof flow cell.The flow channel has been recessed to accept standard FC 71 coupon sizes (one 6x25x2 mm thick; three 10 mm diameter x 2 mm thick disc coupons.
Electron Microscopy Sciences Vortex Genie Rubber Cover for 3-Inch Platform
Snap on these attachments for new ways to use your Vortex-Genie.
Chemglass Life Sciences Elastic Bands for Recessed Platform, Set of 2 (Recessed Platform Required) (Fig. 10)
NOTE: VORTEX-GENIE 1 MAY ONLY BE USED WITH POP-OFF CUP AND 3" PLATFORM.
Biosurface Technologies Corp Dual Channel Transmission Flow Cell w/injection ports (polycarbonate flow channel; platform stage mount), for Growing and Imaging of Biofilms.
"The models FC 284 and 285 flow cell design is based on the FC 81 but accommodates two growth channels in the same footprint as a 96-well microtiter plate. This format allows biofilms to be grown side by side for duplicate or “control-treatment” experiments. Biofilms growing in each channel can be easily compared microscopically. The body of the flow cell consists of a polycarbonate or anodized aluminum flow channel. Glass viewing ports allow transmitted, reflected, fluorescent, and confocal microscopy of biofilm growth in the flow channels. All units are autoclavable and re-useable. The flow cell dimensions allow for easy mounting in inverted microscope stages designed to hold 96-well microtiter plates.The viewing windows consist of a no. 2, 24x60 mm cover slip. The opposing viewing window consists of a standard 75 x 25 x 1 mm glass microscope slide. The glass viewing windows are held in place by an aluminum cover plate.
Biosurface Technologies Corp Dual Channel Coupon Evaluation Flow Cell w/injection ports (polycarbonate flow channel; platform stage mount), for Growing and Imaging of Biofilms on Disc Coupons.
"The models FC 274 and 275 flow cell design is based on the FC 71 but accommodates two growthchannels. This design allows biofilms to be grown side by side for duplicate or “control – treatment” experiments. The body of the flow cell consists of a polycarbonate or anodized aluminum flow channel. Glass viewing ports allow reflected, fluorescent, and confocal microscopy of biofilm growth in the flow channels. The overall length and width of the flow cells are designed to fit into a 96-well micro-titer plate holder on upright or inverted microscope stages.The viewing window consist of a no. 2, 24x60 mm cover slip. The glass viewing window is held in place by an aluminum cover plate. The cover plates also compress the silicone rubber gasket to provide a leak-proof flow cell.The flow channel has been recessed to accept standard FC 71 coupon sizes (one 6x25x2 mm thick; three 10 mm diameter x 2 mm thick disc coupons.
INFORS USA INC CELLTRON BENCHTOP SHAKER CO2
- Drive type: Magnetic orbital drive
- Heat emission: Minimal 4 W
- Control unit: External magnetic touch controller
- Antimicrobial surface: true, silver-based coating
- Corrosion resistance: true, ABS plastic and stainless steel
- Speed range: 20 to 200 rpm
- Speed increment: 1 rpm
- Speed accuracy: ±1%
- Shaking orbit: 25 mm
- Maximum load: 2.5 kg
- Platform dimensions: 400 x 330 mm
- Unit dimensions (W x D x H): 450 x 380 x 90 mm
- Unit weight: 11 kg
- Operating temperature (shaker): 4°C to 60°C
- Operating humidity (shaker): 10% to 98%
- Operating CO2 content (shaker): Up to 20%
- Compatibility: INFORS HT clamps, test tube holders, microtiter plates, Sticky Stuff adhesive mats
Glas Col LLC SEPARATORY FUNNEL FLOOR SHAKER
- Nutating 3D shaking action for comprehensive agitation
- Speed range: 10-160 cycles/min or 10-170 rpm
- Configured to hold four 2-liter separatory funnels
- Maximum capacity of up to eight 2-liter separatory funnels
- Load weight capacity: 80 lbs (36.3 kg) for floor model
- Electrical rating: 120 V
- Electrical connection: 6-ft., 3-wire cord
- User-friendly touchscreen interface for control
- Platform material: stainless steel
- Design includes "Lazy Susan" for 360-degree rotation
- Base dimensions: 27.25 in W x 30.25 in D x 26 in H
- Platform working height: 36 in
- Compatible with fume hoods: true
- Unit weight: 400 lbs (181 kg)
Alkali Scientific™ H5000-H MultiTherm Shaker with Heating ONLY
Alkali Scientific™, H5000-H, MultiTherm Shaker with Heating Only, 115V The MultiTherm shaker is a temperature controlled vortexer, useful for a variety of molecular biology applications. Despite its modest 8 x 11 in. footprint, all popular tubes and plates are compatible, including as many as six 50ml tubes. Speed, time and temperature settings are continuously visible on the LCD, simultaneously showing both actual and selected values. Temperature control from 0°C to 100°C Exchangeable blocks, for tube sizes 0.2 to 50mL Precision contoured wells for uniform thermal transfer Two models: Heat/Cool or Heat only Sequence link function for linking or repeating programs (HC model only) Blocks sold separately
Glas Col LLC Rotator
Dry powder rotator. RPM 2-80. 120V. For bottles 7" to 10" in height and up to 7" in diameter. Ten pound maximum weight capacity. Variable speed control. 1.5A, 50/60 Hz.